Mitutoyo 700-126, Plastic Digital Caliper, 0 - 6"/150mm, .001"/0.1mm, Non-Output Reviews
Mitutoyo 700-126, Plastic Digital Caliper, 0 - 6"/150mm, .001"/0.1mm, Non-Output Feature
- Upper and lower jaws for precise inner diameter (ID) and outer diameter (OD) measurements
- Durable plastic construction for ease of handling and to help extend caliper life
- Large, digital, single-value readout LCD display for optimum readability
- Function control buttons on caliper face for ease of access: Zero-Setting and Power On/Off
- Do-it-yourself design for use in a wide range of settings
The Mitutoyo 700-126 plastic caliper is a digital caliper with upper and lower jaws for inside and outside measurements from 0 to 150 mm/0 to 6”. Easily-read digital LCD characters and durable plastic construction make this caliper useful in a wide range of settings, including nurseries, medical offices, laboratories, and trade workshops. This caliper has accessible zero-setting and on/off function control buttons and uses both inch and metric measuring systems.
The 700-126 has the electrostatic capacitance type linear encoder. It measures inner (ID) and outer diameter (OD). Its inch/metric system uses a 0.001”/0.1 mm gradient. The caliper’s length is 235 mm, jaw depth is 40 mm, sliding LCD is 60 by 34 mm, and beam width is 16 mm. Range is 0 to 6”/0 to 150 mm, resolution is 0.001”/0.1 mm, and accuracy is rated + or – 0.008”/0.2 mm. Also included are zero-setting and power on/off function buttons. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. Response speed is 1,800 mm/s. The SR44 silver oxide cell battery (938882) lasts approximately two years with normal use and is recommended to maintain constant voltage levels.
Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, and/or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
What’s in the Box?
- Mitutoyo 700-126 digital caliper
- One SR44 silver oxide cell battery
- Fitted, plastic case
Go tO Store Now !!
More Products
More Reviews
No comments:
Post a Comment